Team Associated RC8B4e 1/8 4WD Off-Road Electric Buggy Kit

The Team Associated RC8B4e Team 1/8 4WD Off-Road Electric Buggy Kit is designed to push the limits of off road racing. This buggy has been given a huge overhaul and features updated battery configurations, front upper and lower arm design, rear arm design, chassis braces and rear hub design for peak performance. The front-end geometry has also received updates allowing for increased stability and more consistent steering through the entire steering throw. All of these features come together for a buggy that is ready to dominate the track.

About the RC8B4e

Battery Configurations

The chassis allows for one of two configurations, Two 2S or One 4S. Using two 2S packs, you can run a "saddle pack" style and have the lowest CG and exceptional weight bias. Using one 4S allows for a more simplified setup and allows for a more centralized weight distribution.

Front Suspension

The front upper and lower suspension arms have been designed to accommodate a wide range of flex and stiffness options. Optional inserts have been made to provide extreme fine tuning and will work with the upper or lower arm. The lower arm features a one-piece anti-roll bar link mounts that are in-line with the anti-roll bar for simplified assembly and operation.

Rear Suspension

The rear arms have been designed for optimum flex and stiffness with no inserts. However, optional inserts may be used for fine tuning. The rear arms also feature a one-piece anti-roll bar link is mounted in-line with the anti-roll bar with a BHCS instead of a shock pin for simplified assembly.

Features

• Updated front and rear suspension arms
• Updated battery configurations
• Rear wing mount has adjustable wing angle shims
• Extra clearance for shock position adjustment
• Rear wing has more vertical fins for increased straight-line stability
• Rear chassis brace has several design features and flex options
• +1mm offset rear hub with axle height inserts for adjustable roll center tuning




Includes:

• (1) RC8B4 Off-Road Electric Buggy Kit
• Manual




Needed to Complete

• (1) 2-channel radio/transmitter
• (1) 1:8 scale speed control
• (1) 1:8 scale motor, and pinion (see motor manufacturer's gearing recommendations for correct pinion size)
• (1) High-torque steering servo
• (1) 4S LiPo battery or (2) 2S LiPo shorty "saddle pack" batteries
• (1) Compatible charger
• (4) 1:8 scale buggy tires & wheels
• CA (Cyanoacrylate) glue
• Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
• Thread-locking compound
• Tools
• Silicone Shock & Diff Fluid
• Transmitter batteries



Specifications:

Scale Size	1:8
Terrain	Off-Road
Body Style	Buggy
Drive	4WD
Length	19.13in (486mm)
Width	11.99in (304.5mm)
Wheelbase	-
Weight	Varies
Power Source	Electric
Assembly Level	Kit*