Serpent S120 PRO 1/12 Pan Car Kit

This is the Serpent S120 Pro 1/12 Pan Car Kit. This high performance 1/12 scale pan chassis features a host of nicely machined carbon fiber and aluminum parts. After the huge success of the F110 SF4, The step to develop a 1/12th scale car on the same platform was logical. The focus was to make the car easy to work on and durable without sacrificing performance. 

Features:

• Updated innovative design for the rear pod with side bearings in linear guides replacing the traditional side-links
• With the redesigned side-bearing set-up, the roll motion is completely linear and independent, thus the cornering is completely independent from accelerating or braking.
• Lipo longitudinal or Lipo transversal with narrow chassis design
• Side bearing design opens the possibility to use both inline and cross lipo orientation while keeping a narrow chassis design.
• Special holders for lipo cross configuration included in the kit, inline configuration is optional in aluminium and brass.
• Full strength top-deck to prevent longitudinal flex and keep torsional flex on a reasonable level.
• Lipo can be exchanged in any configuration without removing the body
• 1-screw Lipo mount in all lipo orientations.
• Easy to work on and strong front suspension from the F110 SF4 is evolved for the pan-car specific demands. All screws are easily accessible.
• Servo mount is adjustable to fit every servo on the correct position.
• Double short tube system for the rear roll damping
• Updated ultra-low center of gravity rear pod
• Angled rear plate gives torsional stiffness, protecting the rear shaft and bearings, while keeping all masses low in the pod.
• Bulkheads are completely redesigned to keep masses as low as possible while still maintaining strength
• Rear shaft mount is completely new and innovative. Ride height and wheelbase can be adjusted very precise with shims.
• Rear carbon shaft with variable diameter, reinforced by an aluminium sleeve at the bearing and where the pin connects the aluminium thread insert with the shaft.
• Improved shocks are easier to build with bigger piston diameter as the Project 4X, and the Project 4X bleeding hole for easy rebound adjustment

• S120 Kit
• 10,000cst Shock Oil
• 8,000 Diff Fluid 

• 3 Channel Radio System w/High Speed Steering Servo
• 1/12 Pan Car Tires & Wheels
• Motor & ESC
• 4 Cell NiMH, or 1S LiPo Battery & Compatible Charger
• 1/12 Pan Car Body & Polycarbonate Paint