Gmade 1/10 GS02 BOM RTR Ultimate Trail Truck Kit GMA57003

This is the Gmade GS02 BOM Ultimate Trail Truck 1/10 Scale Electric Powered Ready-to-Run Truck. The GS02 BOM is built on a scale-looking ladder frame construction with stand-up front shock and lay-down rear dampers that make way for the scale roll cage construction. The steering servo is located in the front part of the chassis and the steering assembly is of a zero-Ackermann design for maximized steering performance. Angled front king pins minimize the scrub radius for further increased steering efficiency. The heavy-duty threaded aluminum shock absorbers utilize 3.5mm shock shafts and the transmission, with all-metal internal gears, is of a torque twist reducing design. Optionally a 2-speed hi/lo transmission conversion will become available to add speed when needed. The kit is rounded out by grippy tires, a cool looking body shell, a couple of scale accessories.

Features:

• High-strength steel ladder frame
• Adjustable wheelbase
• Relocated rear shocks
• Front weight bias for improved crawling
• Skid plate protects the transmission and other critical components
• 27 turn brushed motor
• Chassis mounted servo system with panhard bar
• Waterproof receiver box
• Dust-proof electronics box
• Torque twist reduction transmission
• Dual pad slipper clutch
• All-metal internal gears
• Hardened carbon steel universal joints
• Easily adjustable motor mount
• Front tube bumper
• GA44 axles
• Zero Ackerman steering for maximum performance
• Threaded aluminum SD Scaler shocks
• 1.9" NR03 wheels with MT1903 Off-Road tires
• BOM lexan body with included realistic decals

Specs:

Width: 230mm (9.05")
Height: 220mm (8.66")
Length: 515mm (20.28")
Wheel Base: 313mm (12.3")
Ground Clearance: 73mm (2.87")
Weight with no electronics: 2.1kg (4.6lb)
Tx Channels: 2-Channel
Tx Antenna Length: 26mm (1.02")
Tx Dimensions: 210mmx95mmx160mm (8.26"x3.74"x6.3")
Tx Weight: 239g (8.43oz)
Tx Power: 6V DC (1.5V AA x 4)
Rx Channels: 3-Channel
Rx Antenna Length: 140mm (5.51")
Rx Dimensions: 35mmx22mmx12mm (1.37"x0.87"x0.47")
Rx Weight: 5g (0.17oz)
Rx Power: 4.0-6.5V DC
Frequency: 2.4GHz
RF Range: 2.405-2.475GHz
RF Power: <20dBm
RF Receiver Sensitivity: -98dBm
Band/Bandwidth: 141/500KHz
Code Type: GFSK
Sensitivity: 1024
ESC Cont. Current (Forward/Reverse): 40A/20A
ESC Burst Current (Fwd/Rev): 180A/90A
ESC Input Power: 2-3S LiPo or 5-9 Cells NiMH
ESC Motor Limit (2S LiPo/5-6 Cell NiMH): 540/500 size motor ≥12T or RPM <30000 @ 7.2V
ESC Motor Limit (3S LiPo/7-9 Cell NiMH): 540/500 size motor ≥18T or RPM <20000 @ 7.2V
Resistance (Fwd/Rev): 0.002 Ohm/0.004 Ohm
Built-In BEC: 2A/6V (Linear mode BEC)
ESC Dimensions: 46.5mmx34mmx28.5mm (1.83"x1.33"x1.12")
ESC Weight: 70g (2.46oz)
Motor Type: 27 Turn 540-size
Motor Shaft Diameter: 3.1mm (0.12")
Motor Shaft Length: 12mm (0.47")
Motor Can Diameter: 36mm (1.42")
Motor Can Length: 50mm (1.97")
Servo Dimensions: 40.7mmx20.5mmx39.5mm (1.60"x0.81"x1.56")
Servo Weight: 60g (2.11oz)
Servo Input Voltage: 6.0V
Servo Stall Torque: 13.2kg/cm
Servo No-Load Running Speed: 0.14sec/60°
Servo Storage Temp: -20C ~ 60C
Servo Dead Band Width: 4us